Description

Top quality tungsten carbide

Made in USA

Seal and seat supplied with each tip

5000psi (340 bar) maximum working pressure

Fits most manufacturers tip guards including Graco RAC5

How to choose the correct size Airless Spray Tip:

A wide range of airless spray tip sizes are available. Using the correct size tip for a particular job gives good spraying control and ensures professional quality painting results. Airless tips are identified by a three digit number – the first number indicating the spray pattern angle and width of the fan; the second two numbers show the orifice size in thousandths of an inch and determine the paint flow rate.

Airless Spray Tip Wear:

The spray tip is a wear part and should be replaced regularly. Depending on type of paint used, after spraying as little as 200 litres the tip may be worn enough to require replacement. Water based paints tend to cause quicker wear than an oil based or clear coating. When the tip orifice enlarges, the fan pattern becomes irregular and paint usage increases making it hard to get good results. Regular spray tip replacement is a cost effective requirement for getting the benefits of airless spraying.

Sizes available:

207      209      211      213      215      217      219

309      311      313      315      317      319      321

411      413      415      417      419      421    423425

511      513      515      517      519      521      523    525